EP2S180 ALTERA [Altera Corporation], EP2S180 Datasheet - Page 11

• Manufacturer Part Number: EP2S180
• Description: DSP Development Board
• Manufacturer: ALTERA [Altera Corporation]

Altera Corporation
Note to
(1)
VGA D/A Converter
Audio CODEC
CompactFlash card
connector
Debugging Interfaces
Mictor connectors
Expansion Interfaces
Analog Devices
connector
TI-EVM connectors
Expansion Prototype
Connectors
Table 2–1. Stratix II EP2S180 DSP Development Board Components & Interfaces (Part 2 of 2)
Component/
These headers can be used to interface to Analog Devices A/D converter evaluation boards. They are designated
as J5 and J6, and interface to Analog Devices AD6645/9433/9430 external A/D converters.
Interface
Table
(1)
2–1:
f
I/O
I/O
I/O
I/O
Expansion
Expansion
Expansion
Type
Environmental Requirements
The Stratix II EP2S180 DSP development board must be stored between
–40° C and 100° C. The recommended operating temperature is between
0° C and 55° C.
w
The DSP Development Kit, Stratix II Professional Edition includes a heat
sink and fan combination, also known as an active heat sink. Depending
on the specific requirements of your application, this level of cooling
may not be necessary.
U45
U5
CON1
J20
J5, J6
J31, J33
J23 - J25,
J26 - J28
Designation
The Stratix II EP2S180 DSP development board can be damaged
without proper anti-static handling.
Board
Stratix II EP2S180 DSP Development Board Reference Manual
One 8-bit, 180 megapixels-per-second triple D/A
converter for VGA output
96-KHz stereo audio CODEC
CompactFlash card connector
One Mictor header connected to 33 pins on the Stratix II
device (32 data signals, 1 clock signal) for use with an
external logic analyzer.
Interface to Analog Device’s A/D converters via two
40-pin connectors.
Interface to the TI-EVM. (The connectors are on the
reverse side of the board.)
The board provides two custom interfaces to daughter
cards via 74-pin headers. (These pins can also be used
for general I/O.)
These connectors are referred to on the board as
“Santa Cruz Daughter Card 1“ and “Santa Cruz
Daughter Card 2”
Core Version a.b.c variable
Board Components & Interfaces
Description
2–3