MM4KP DC24 Omron, MM4KP DC24 Datasheet - Page 11

• Manufacturer Part Number: MM4KP DC24
• Description: RELAY POWER 4PDT 5A 24VDC
• Manufacturer: Omron
• Series: MMKr

Specifications of MM4KP DC24

• Relay Type: General Purpose
• Contact Form: 4PDT (4 Form C)
• Contact Rating (current): 5A
• Switching Voltage: 250VAC, 250VDC - Max
• Coil Type: Latching, Dual Coil
• Coil Current: 113mA
• Coil Voltage: 24VDC
• Turn On Voltage (max): 19.2 VDC
• Mounting Type: Socket
• Termination Style: 14 Pin Socketable
• Circuit: 4PDT (4 Form C)
• Contact Rating @ Voltage: 5A @ 220VAC
• Control On Voltage (max): 19.2 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Control Off Voltage (min): -
• Lead Free Status / Rohs Status: Details
• Other names: MM4KPDC24; MM4KPDC24NC

■ Cased Relays with Plug-in Terminal
Cases on Models for Switching DC Loads
As shown at the right, there are three holes
with a 10-mm diameter in the case.
MM2(X)KP
MM3(X)KP
MM4(X)KP
Terminal Arrangement/
Internal Connections
(Bottom View)
Note: Connect the common (C) to positive (+).
Standard Relays
MM3KP
MM2KP
MM4KP
Make sure that all common connections are the same in polarity. The markings of the common connections on the casing all
show "+" but the polarity of the common connections can be either all negative or all positive.
80.5 max.
Note: It is recommended that 55 mm min. is allowed
80.5 max.
64.5
max.
5
54.5 max. (see note)
for this side because the MM2XKP has a
curved protective plate on the side.
64.5
max.
MM4KP
3.5
22
72.5 max.
(see note)
Case Protective Plate
119 max.
123 max.
7
DC-switching Relays
MM3XKP
Be sure the polarity is
correct when connecting
Exposed Models.
Terminal Arrangement/
Internal Connections
(Bottom View)
Standard Relays
MM2KP
Note: Connect the common (C) to positive (+).
Make sure that all common connections are the
same in polarity. The markings of the common
connections on the casing all show "+" but the
polarity of the common connections can be ei-
ther all negative or all positive.
RESET
SET
Note: It is recommended that 73 mm min.
This example is for the MN2XK.
This also applies to models with 3 or 4 poles.
is allowed for this side because the
MM3XKP and MM4XKP have a
curved protective plate on the side.
MM4XKP
DC-switching Relays
MM2XKP
RESET
SET
MMK
11